igmp
OVERVIEW
IGMPCategory:
configPrimary context:
the section called “igmp” (page 556)Related Commands
Usage: igmp ...
Description: Congure various global IGMP parameters for the switch. The
'igmp' command must be followed by a feature-specic keyword.
Use 'igmp ?' to get a list of all possible options.
COMMAND STRUCTURE
■ igmp delayed-flush < 0 to 255 > -- Configures the number of seconds an empty IGMP Multicast
Group filter will persist in hardware after the last group member leaves (p. 195)
COMMAND DETAILS
delayed-flush (p. 195)
delayed-flush
■ igmp delayed-flush < 0 to 255 >
Usage: igmp delayed-ush <0..255>
Description: Congures the number of seconds an empty IGMP Multicast
Group lter will persist in hardware after the last group
member leaves. This Delayed Group Flush will drop any further
'stale' trafc for that group until the timer expires. A
value of 0 (the default behavior) indicates that the feature
is disabled.
Range: < 0 to 255 >
195© 2009 Hewlett-Packard Development Company, L.P.
To Next Page
Loading...
Need help?
General