HP ProCurve 5400zl

ProCurve(cong)# show redundancy
Settings
--------
Mgmt Redundancy : enabled
Statistics
----------
Failovers : 0
Last Failover :
Slot Module Description Status SW Version Boot Image
---- ---------------------------------------- -------- ----------- ---------
1 ProCurve J9092A Management Module 8200zl Standby K.14.XX Primary
2 ProCurve J9092A Management Module 8200zl Active K.14.XX Primary
1 ProCurve J9093A F2 Fabric Module 8200zl Enabled
2 ProCurve J9093A F2 Fabric Module 8200zl Enabled
COMMAND DETAILS
management-module (p. 465)enable (p. 464)active-management (p. 464)
switchover (p. 465)fabric-module (p. 464)disable (p. 464)
active-management
■ redundancy active-management < management-module1 | management-module2 | standby >
Specify the management module that will be active for next boot.
Supported Values:
■ management-module1 -- Configures management-module 1 as an active management module
for next boot
■ management-module2 -- Configures management-module 2 as an active management module
for next boot
■ standby -- Configures standby module as an active management module for next boot
disable
■ redundancy fabric-module < 1 | 2 > disable
Disable the fabric module.
enable
■ redundancy fabric-module < 1 | 2 > enable
Enable the fabric module.
fabric-module
■ redundancy fabric-module < 1 | 2 >
Enable/Disable fabric modules.
Supported Values:
■ 1 -- enable/disable fabric module-1
■ 2 -- enable/disable fabric module-2
464© 2009 Hewlett-Packard Development Company, L.P.
redundancyCommand Line Interface Reference Guide