HP ProCurve 5400zl

wireless-services
OVERVIEW
Category:
configPrimary context:
Related Commands
Usage: wireless-services <SLOT-ID> [<reload|shutdown>]
Description: Congure parameters for the wireless-services module or
change the module's state (reload or shutdown).
Parameters:
o <SLOT-ID> - Congure parameters for the wireless-services module.
o <SLOT-ID> reload - Reboot wireless-services module.
o <SLOT-ID> shutdown - Shutdown (halt) the wireless-services module.
NOTES
Multiple Contexts
This command also is available in the manager and operator contexts.
COMMAND STRUCTURE
■ wireless-services wireless-services -- Configure parameters for the wireless-services module or
change the module's state (reload or shutdown) (SLOT-ID) (p. 758)
■ config -- (ASCII-STR) (p. 757)
■ diagnostic-restart -- Reboot wireless-services module into diagnostic partition. (p. 757)
■ reload -- Reboot wireless-services module. (p. 757)
■ shutdown -- Shutdown (halt) the wireless-services module. (p. 758)
■ tech -- Enter the configuration context for the wireless-services module. (p. 758)
COMMAND DETAILS
tech (p. 758)reload (p. 757)config (p. 757)
wireless-services (p. 758)shutdown (p. 758)diagnostic-restart (p. 757)
config
■ wireless-services SLOT-ID config CONFIG
diagnostic-restart
■ wireless-services SLOT-ID diagnostic-restart
Reboot wireless-services module into diagnostic partition.
reload
■ wireless-services SLOT-ID reload
757© 2009 Hewlett-Packard Development Company, L.P.