COMMAND DETAILS
port-list (p. 188)filter-action (p. 187)ascii (p. 186)
protocol (p. 188)forward (p. 187)connection-rate (p. 186)
source-port (p. 189)multicast (p. 187)connection-rate-portlist (p. 186)
named-filter (p. 188)drop (p. 186)
ascii
■ [no] filter source-port named-filter ASCII
Set the lter name.
Next Available Options:
■ forward -- Set a list of ports to which forwarding of filtered packets is permitted. ([ethernet]
PORT-LIST) (p. 187)
■ drop -- Set a list of ports to which forwarding of filtered packets is not permitted. ([ethernet]
PORT-LIST) (p. 186)
connection-rate
■ [no] filter connection-rate
Usage: [no] lter connection-rate port-list < notify-only | throttle | block>
Description: Selects behavior for port(s) when a host is ltered.
Block will disable the host until an administrator explicitly
re-enables access. Throttle will deny network access for a
specic penalty period before automatically re-enabling
access. Notify will simply log a message/send a SNMP
trap when the lter is tripped.
Next Available Option:
■ connection-rate-portlist -- ([ethernet] PORT-LIST) (p. 186)
connection-rate-portlist
■ [no] filter connection-rate [ETHERNET] PORT-LIST
Next Available Option:
■ filter-action < block | notify-only | throttle > -- (p. 187)
drop
■ filter source-port named-filter ASCII drop [ETHERNET] PORT-LIST
Set a list of ports to which forwarding of ltered packets is not permitted.
■ filter source-port [ETHERNET] PORT-LIST forward [ETHERNET] PORT-LIST drop [ETHERNET]
PORT-LIST
Set a list of ports to which forwarding of ltered packets is not permitted.
■ filter source-port [ETHERNET] PORT-LIST drop [ETHERNET] PORT-LIST
Set a list of ports to which forwarding of ltered packets is not permitted.
186© 2009 Hewlett-Packard Development Company, L.P.
filterCommand Line Interface Reference Guide
To Next Page
Loading...
