HP ProCurve 5400zl

startup-default
OVERVIEW
managerCategory:
managerPrimary context:
show config (page 540)Related Commands
show flash (page 552)
Usage: startup-default [<primary|secondary>] cong FILENAME
Description: Set the default conguration le. A separate conguration
le may be set as the default for each software image, or a
single conguration le may be set as the default when
booting either image by omitting the optional 'primary|secondary'
parameter.
NOTES
Italicized "config" Keywords
The italicized "config | config1" keywords correspond to the names selected for the config
files.
COMMAND STRUCTURE
■ startup-default config < config | config1 > -- Specify configuration file to set as default. (p. 657)
■ startup-default image < primary | secondary > -- (p. 657)
■ config < config | config1 > -- Specify configuration file to set as default. (p. 657)
COMMAND DETAILS
image (p. 657)config (p. 657)
config
■ startup-default < primary | secondary > config < config | config1 >
Specify conguration le to set as default.
Supported Values:
■ config
■ config1
■ startup-default config < config | config1 >
Specify conguration le to set as default.
Supported Values:
■ config
■ config1
image
■ startup-default < primary | secondary >
Supported Values:
657© 2009 Hewlett-Packard Development Company, L.P.