HP ProCurve 5400zl

wireless-services
OVERVIEW
Category:
managerPrimary context:
Related Commands
Usage: wireless-services <SLOT-ID> <reload|shutdown>
Description: Display parameters for the wireless-services module or
change the module's state (reload or shutdown).
NOTES
Multiple Contexts
This command also is available in the config and operator contexts.
COMMAND STRUCTURE
■ wireless-services SLOT-ID diagnostic-restart -- Reboot wireless-services module into diagnostic
partition. (p. 759)
■ wireless-services SLOT-ID reload -- Reboot wireless-services module. (p. 759)
■ wireless-services SLOT-ID shutdown -- Shutdown (halt) the wireless-services module. (p. 759)
COMMAND DETAILS
shutdown (p. 759)reload (p. 759)diagnostic-restart (p. 759)
diagnostic-restart
■ wireless-services SLOT-ID diagnostic-restart
Reboot wireless-services module into diagnostic partition.
reload
■ wireless-services SLOT-ID reload
Reboot wireless-services module.
shutdown
■ wireless-services SLOT-ID shutdown
Shutdown (halt) the wireless-services module.
759© 2009 Hewlett-Packard Development Company, L.P.