HP ProCurve 5400zl

qos
OVERVIEW
QoSCategory:
configPrimary context:
show (page 511)Related Commands
Usage: [no] qos ...
Description: Congure Quality of Service (QoS) on the device. The
command must be followed by a keyword dening a subdomain
of the QoS parameters to congure.
COMMAND STRUCTURE
■ [no] qos apptype < udp-port | tcp-port > -- Configure priorities for TCP/UDP services (p. 415)
■ ip-all -- Specify range of TCP/UDP ports from [to] which to prioritize traffic. (p. 424)
■ port-num -- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT) (p. 427)
■ dscp < 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use. (p. 418)
■ binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 416)
■ integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 423)
■ well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP
(Differentiated-Services Codepoint) value and an 802 (p. 434)
■ priority < 0 | 1 | 2 | ... > -- Specify priority to use. (p. 428)
■ range -- Specify range of TCP/UDP ports from [to] which to prioritize traffic. (p. 432)
■ port-num -- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT) (p. 427)
■ max-port-num -- Maximal TCP/UDP port in the range from [to] which to prioritize
traffic. (TCP/UDP-PORT) (p. 425)
■ dscp < 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use. (p. 418)
■ binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
(p. 416)
■ integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 423)
■ well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP
(Differentiated-Services Codepoint) value and an 802 (p. 434)
■ priority < 0 | 1 | 2 | ... > -- Specify priority to use. (p. 428)
■ ipv4 -- Specify range of TCP/UDP ports from [to] which to prioritize traffic. (p. 425)
■ port-num -- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT) (p. 427)
■ dscp < 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use. (p. 418)
■ binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 416)
■ integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 423)
■ well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP
(Differentiated-Services Codepoint) value and an 802 (p. 434)
■ priority < 0 | 1 | 2 | ... > -- Specify priority to use. (p. 428)
■ range -- Specify range of TCP/UDP ports from [to] which to prioritize traffic. (p. 432)
■ port-num -- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT) (p. 427)
■ max-port-num -- Maximal TCP/UDP port in the range from [to] which to prioritize
traffic. (TCP/UDP-PORT) (p. 425)
■ dscp < 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use. (p. 418)
■ binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
(p. 416)
■ integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 423)
411© 2009 Hewlett-Packard Development Company, L.P.