HP ProCurve 5400zl

link-keepalive
OVERVIEW
Category:
configPrimary context:
Related Commands
Usage: link-keepalive interval <10-100>
link-keepalive retries <3-10>
Description: Congure UDLD on your switch.
The rst version of the command is used to congure
keep-alive interval in seconds. Here 10 is 1 sec, 11 is 1.1 sec,
and so on. Default keep-alive interval is 5 seconds.
The second version of the command is used to congure
maximum number of keep-alive attempts. Default keep-alive
attempt is 4.
COMMAND STRUCTURE
■ link-keepalive interval < 10 to 100 > -- Set link keep-alive interval in deciseconds. (p. 349)
■ link-keepalive retries < 3 to 10 > -- Set maximum number of link keep-alive attempts. (p. 349)
COMMAND DETAILS
retries (p. 349)interval (p. 349)
interval
■ link-keepalive interval < 10 to 100 >
Set link keep-alive interval in deciseconds.
Range: < 10 to 100 >
retries
■ link-keepalive retries < 3 to 10 >
Set maximum number of link keep-alive attempts.
Range: < 3 to 10 >
349© 2009 Hewlett-Packard Development Company, L.P.