front-panel-security
OVERVIEW
Switch SecurityCategory:
configPrimary context:
Related Commands
Usage: [no] front_panel_security
<password-clear [reset-on-clear] |
factory-reset |
password-recovery>
Description: Enable/disable the ability to clear the password(s) and/or
conîš¿guration via the front panel buttons. If 'password-clear' is
disabled, the password(s) cannot be reset using the clear button on
the front panel of the device. If 'factory-reset' is disabled, the
conîš¿guration/password(s) can not be reset using the clear and
reset button combination at boot time. With 'password-recovery'
enabled (and the front panel buttons disabled), a lost password can
be recovered by contacting HP customer support. With 'password-
recovery' disabled, there is no way to access a device after losing
a password with the front panel buttons disabled.
COMMAND STRUCTURE
â– [no] front-panel-security factory-reset -- Enable/Disable factory-reset ability (p. 190)
â– [no] front-panel-security password-clear -- Enable/Disable password clear (p. 191)
â– reset-on-clear -- Reset switch on password clear (p. 191)
â– [no] front-panel-security password-recovery -- Enable/Disable password recovery (p. 191)
EXAMPLES
Example: no front-panel-security password-recovery
Disable the password-recovery option:
ProCurve(conîš¿g)# no front-panel-security password-recovery
***CAUTION***
Disabling the clear button without password recovery prevents switch passwords
from being reset. If the switch password is lost, restoring the default factory
conîš¿guration will be required to regain access!
Continue with disabling password recovery [y/n]? y
COMMAND DETAILS
password-recovery (p. 191)factory-reset (p. 190)
reset-on-clear (p. 191)password-clear (p. 191)
factory-reset
â– [no] front-panel-security factory-reset
Enable/Disable factory-reset ability
190© 2009 Hewlett-Packard Development Company, L.P.
To Next Page
Loading...
Need help?
General