HP ProCurve 5400zl

■ ip
■ ipx
■ arp
■ appletalk
■ sna
■ netbeui
Next Available Options:
■ forward -- Set a list of ports to which forwarding of filtered packets is permitted. ([ethernet]
PORT-LIST) (p. 187)
■ drop -- Set a list of ports to which forwarding of filtered packets is not permitted. ([ethernet]
PORT-LIST) (p. 186)
source-port
■ [no] filter source-port
Usage: [no] lter source-port [...]
Description: Specify source-port lter to manage.
Create a named lter,associate source port-list to a
named-lter and apply actions.The named lter can only be 20
charactres long.If source port lter is not named,then
portname is considered as a lter name, and apply actions to
received packet on port. If preceded by 'no' the command
deletes the lter specied.To delete a named-lter use
no lter source-port named-lter <lter-name> explicitly.
Next Available Options:
■ named-filter -- Set the filter name.(p. 188)
■ port-list -- Set the list of source port filters. ([ethernet] PORT-LIST) (p. 188)
189© 2009 Hewlett-Packard Development Company, L.P.
filterCommand Line Interface Reference Guide