ProCurve# ping6 80fe::20b:cdff:fedd:9a62
ProCurve# ping6 fe80::5%vlan20
COMMAND DETAILS
source (p. 396)ip-addr (p. 396)data-fill (p. 396)
timeout (p. 397)ipv6-addr (p. 396)data-size (p. 396)
vlan (p. 397)repetitions (p. 396)host-name (p. 396)
data-fill
■ ping6 data-fill OCTET-STR
Text string used as data in ping packets. You can enter up to 1024
alphanumeric characters in the text.
Valid values: 0-1024.
Default: 0 (no text is used)
data-size
■ ping6 data-size < 0 to 65471 >
Size of data (in bytes) to be ent in ping packets.
Valid values: 0-65471.
Range: < 0 to 65471 >
Default: 0
host-name
■ ping6 HOST-NAME
Hostname of the device to ping.
ip-addr
■ ping6 source IPV6-ADDR
Source IPv6 address.
ipv6-addr
■ ping6 IPV6-ADDR
IPv6 address of device to ping.
repetitions
■ ping6 repetitions < 1 to 10000 >
Number of times that IPv6 ping packets are sent to the destination
IPv6 host. Valid values are: <1-10000>.
Range: < 1 to 10000 >
Default: 1
source
■ ping6 source
396© 2009 Hewlett-Packard Development Company, L.P.
ping6Command Line Interface Reference Guide
To Next Page
Loading...
