jumbo
OVERVIEW
Category:
configPrimary context:
the section called “jumbos” (page 564)Related Commands
Usage: jumbo ...
Description: Congure Global Jumbos parameters for the switch.
NOTES
Restriction on Value of max-frame-size
The value of max-frame-size must be greater than or equal to 18 bytes more than the value
selected for ip-mtu. For example, if ip-mtu is set to 8964, the max-frame-size is configured
as 8982.
COMMAND STRUCTURE
■ jumbo ip-mtu < 1500 to 9198 > -- Set the untagged Jumbos IP MTU or L3 MTU size for the switch
(p. 319)
■ jumbo max-frame-size < 1518 to 9216 > -- Set the untagged Jumbos Max frame size for the switch
(p. 319)
COMMAND DETAILS
max-frame-size (p. 319)ip-mtu (p. 319)
ip-mtu
■ jumbo ip-mtu < 1500 to 9198 >
Usage: jumbo ip-mtu <1500-9198>
Description: Set the untagged Jumbos IP MTU or L3 MTU size for the switch.
This value will be effective only when Jumbos are
enabled.
Range: < 1500 to 9198 >
max-frame-size
■ jumbo max-frame-size < 1518 to 9216 >
Usage: jumbo max-frame-size <1518-9216>
Description: Set the untagged Jumbos Max frame size for the switch.
This value will be effective only when Jumbos are
enabled.
Range: < 1518 to 9216 >
319© 2009 Hewlett-Packard Development Company, L.P.
To Next Page
Loading...
Need help?
General