COMMAND DETAILS
mgmt-interfaces (p. 507)default-logon (p. 507)
default-logon
■ setup default-logon < CLI | Menu >
Specify whether switch should boot to CLI (default) or menu.
Supported Values:
■ CLI -- Set Command Line Interface as default console interface.
■ Menu -- Set Menu as default console interface.
mgmt-interfaces
■ setup mgmt-interfaces
Usage: setup mgmt-interfaces
Description: Enter the 'Management Interface Wizard' for conguring various
management interfaces.
This wizard will help you with the initial setup of the various
management interfaces.The current values are shown in
brackets[].Type in a new value, or press <Enter> to keep the
current value.Press CTRL-C at any time to quit the wizard
without saving any changes.Press ? for help.
507© 2009 Hewlett-Packard Development Company, L.P.
setupCommand Line Interface Reference Guide
To Next Page
Loading...
