EasyManua.ls Logo

HP ProCurve 5400zl

HP ProCurve 5400zl
765 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ProCurve(cong)# router vrrp
ProCurve(cong)# vlan 10
ProCurve(vlan-10)# vrrp vrid 1
ProCurve(vlan-10-vrid-1)# owner
ProCurve(vlan-10-vrid-1)# virtual-ip-address 10.10.10.1 255.255.255.0
ProCurve(vlan-10-vrid-1)# enable
ProCurve(vlan-10-vrid-1)# show vrrp vlan 10 vrid 1 cong
VRRP Virtual Router Conguration Information
Vlan ID : 10
Virtual Router ID : 1
Administrative Status [Disabled] : Enabled
Mode [Uninitialized] : Owner
Priority [100] : 255
Advertisement Interval [1] : 1
Preempt Mode [True] : True
Primary IP Address : Lowest
IP Address Subnet Mask
--------------- ---------------
10.10.10.1 255.255.255.0
To create VR 1 in VLAN 10 and enter the VR context, you would execute the following command:
ProCurve(vlan-10)# vrrp vrid 1
ProCurve(vlan-10-vrid-1)#
COMMAND DETAILS
redistribute (p. 485)hold-time (p. 480)area (p. 474)
restrict (p. 485)inter-area (p. 480)area-id (p. 476)
retransmit-interval (p. 486)intra-area (p. 480)authentication (p. 476)
rfc1583-compatibility (p. 486)ip (p. 481)authentication-key (p. 476)
rip (p. 486)ip-addr (p. 481)auto-summary (p. 476)
rp-address (p. 487)IP-ADDR (p. 481)backbone (p. 477)
rp-candidate (p. 487)join-prune-interval (p. 481)bsm-interval (p. 477)
source-ip-vlan (p. 488)md5-auth-key-chain (p. 481)bsr-candidate (p. 477)
spt-threshold (p. 488)metric-type (p. 482)chain-name (p. 478)
state-refresh (p. 489)no-advertise (p. 482)cost (p. 478)
stub (p. 489)normal (p. 482)dead-interval (p. 478)
transit-delay (p. 489)no-summary (p. 482)default-metric (p. 478)
trap (p. 489)nssa (p. 483)distance (p. 479)
traps (p. 491)ospf (p. 483)external (p. 479)
type (p. 491)override (p. 484)GROUP-ADDR/GROUP-MASK (p.
479) virtual-link (p. 492)pim (p. 484)
group-prefix (p. 480) vrrp (p. 492)priority (p. 484)
hash-mask-length (p. 480) range (p. 484)
hello-interval (p. 480)
area
[no] router ospf area
Usage: area <OSPF-AREA-ID|backbone> [normal]
area <OSPF-AREA-ID|backbone> nssa <0-16777215>
[metric-type <type1|type2>] [no-summary]
area <OSPF-AREA-ID|backbone> stub <0-16777215> [no-summary]
474© 2009 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide

Table of Contents

Other manuals for HP ProCurve 5400zl

Related product manuals