HP ProCurve 5400zl

Description: Set default metric for imported routes.
Default value is 1.
Range: < 1 to 15 >
distance
■ router ospf distance
Usage: distance <intra-area|inter-area|external> <1-255>
Description: Set administrative distance to associate with intra-area,
inter-area and AS-external routes learned by OSPF. Default
value is 110 for all types of OSPF routes.
Next Available Options:
■ intra-area < 1 to 255 > -- Set administrative distance to associate with intra-area routes learned
by OSPF.(p. 480)
■ inter-area < 1 to 255 > -- Set administrative distance to associate with inter-area routes learned
by OSPF.(p. 480)
■ external < 1 to 255 > -- Set administrative distance to associate with external routes learned
by OSPF.(p. 479)
■ router rip distance < 1 to 255 >
Usage: distance <1-255>
Description: Set administrative distance for routes learned via RIP.
Default value is 120.
Range: < 1 to 255 >
external
■ [no] router ospf distance external < 1 to 255 >
Set administrative distance to associate with external routes learned by OSPF.
Range: < 1 to 255 >
GROUP-ADDR/GROUP-MASK
■ [no] router pim rp-address IP-ADDR IP-ADDR/MASK-LENGTH
Specify the range of multicast group addresses associated with the static RP.
Next Available Option:
■ override -- Specify whether or not static RP configuration precedes the information learned by
a BSR. (p. 484)
■ router pim rp-candidate source-ip-vlan VLAN-ID group-prefix IP-ADDR/MASK-LENGTH
Enter the address and mask to dene the multicast group range.
■ router pim rp-candidate group-prefix IP-ADDR/MASK-LENGTH
Enter the address and mask to dene the multicast group range.
479© 2009 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide