HP ProCurve 5400zl User Manual

timesync
OVERVIEW
Switch ManagementCategory:
configPrimary context:
ip (page 290)Related Commands
sntp (page 634)
the section called “timep” (page 599)
the section called “sntp” (page 592)
Usage: [no] timesync <timep|sntp>
Description: Congure the network time protocol.
COMMAND STRUCTURE
■ timesync sntp -- Set the time protocol to SNTP (p. 689)
■ timesync timep -- Set the time protocol to the TIME protocol (p. 689)
EXAMPLES
Example: timesync sntp
Select SNTP and configure it with unicast mode and an SNTP server at 10.28.227.141 with the default
server version (3) and default poll interval (720 seconds):
ProCurve(cong)# timesync sntp
ProCurve(cong)# sntp unicast
ProCurve(cong)# sntp server 10.28.227.141
COMMAND DETAILS
timep (p. 689)sntp (p. 689)
sntp
■ timesync sntp
Set the time protocol to SNTP
timep
■ timesync timep
Set the time protocol to the TIME protocol
689© 2009 Hewlett-Packard Development Company, L.P.

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English