HP ProCurve 5400zl User Manual

■ community -- Show SNMPv3 Community table. (p. 539)
■ enable -- Show SNMPv3 status. (p. 550)
■ engineid -- Show switch's SNMP engineId. (p. 550)
■ group -- Show SNMPv3 User to Group mappings. (p. 553)
■ notify -- Show SNMPv3 notification table. (p. 574)
■ only -- Show SNMP message reception policy. (p. 574)
■ params -- Show SNMPv3 Target Parameters table. (p. 575)
■ restricted-access -- Show SNMPv1 and SNMPv2c access properties. (p. 586)
■ targetaddress -- Show SNMPv3 Target Address table. (p. 597)
■ user -- Show SNMPv3 users. (p. 601)
■ view -- Show views. (p. 602)
sntp
■ show sntp
Usage: show sntp
Description: Show congured time protocol and servers.
source-binding
■ show ip source-binding
Show Dynamic IP Lockdown trap status.
Next Available Option:
■ traps -- Show Dynamic IP Lockdown trap status. (p. 599)
source-lockdown
■ show ip source-lockdown
Show Dynamic IP Lockdown conguration.
Next Available Options:
■ status -- Show Dynamic IP Lockdown port status. (p. 596)
■ bindings -- Show source bindings for Dynamic IP Lockdown ports. (p. 534)
source-port
■ show filter source-port
Usage: show lter source-port
Description: Show a table of source-port lter names
with the associated source ports and actions
spanning-tree
■ show spanning-tree
Usage: show spanning-tree [[ethernet] PORT-LIST] [cong|detail]
show spanning-tree [[ethernet] PORT-LIST] instance <ist|INSTANCE-ID>
592© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English