front-panel-security
â– show front-panel-security
Usage: show front-panel-security
Description: Show current security status of the front panel butons. If
'password-clear' is disabled, the password(s) cannot be reset using
the clear button on the front panel of the device. If 'factory-
reset' is disabled, the conîš¿guation/password(s) can not be reset
using the clear and reset button combination at boot time. With
'password-recovery' enabled (and the front panel buttons disabled),
a lost password can be recovered by contacting HP customer support.
With 'password-recovery' disabled, there is no way to access a
device after losing a password with the front panel buttons
disabled.
general
â– show ip ospf general
Usage: show ip ospf general
Description: Show OSPF basic conîš¿guration and operational information.
â– show ip rip general
Usage: show ip rip general
Description: Show RIP basic conîš¿guration and operational information.
global
â– show vrrp config global
Show global VRRP conîš¿guration information.
â– show vrrp statistics global
Show global VRRP conîš¿guration information.
group
â– show ip igmp group IP-ADDR
Show ports the speciîš¿ed multicast group address is registered on.
â– show ipv6 mld vlan VLAN-ID group
Show MLD VLAN group info.
Next Available Option:
â– ipv6-addr -- Show MLD VLAN group address information. (IPV6-ADDR) (p. 563)
â– show snmpv3 access-rights < ManagerPriv | ManagerAuth | OperatorAuth | ... >
Show SNMPv3 users.
553© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General