filter
■ show filter
Usage: show lter [INDEX]
Description: Show a table of security lters or a lter
detailed information, if the lter's INDEX is specied.
Next Available Options:
■ INDEX -- Show detailed information for the filter identified by the INDEX. The indices are
displayed by the 'show filter' command.(p. 557)
■ source-port -- (p. 592)
fingerprint
■ show crypto client-public-key fingerprint
Display hexadecimal hash.
■ show crypto client-public-key < manager | operator > fingerprint
Display hexadecimal hash.
■ show crypto client-public-key < manager | operator > KEYLIST fingerprint
Display hexadecimal hash.
■ show crypto host-public-key fingerprint
Display hexadecimal hash.
■ show ip client-public-key fingerprint
Display hexadecimal hash.
■ show ip host-public-key fingerprint
Display hexadecimal hash.
flash
■ show flash
Usage: show ash
Description: Show the version of software stored in the Primary
and Secondary image locations.
forward-protocol
■ show ip forward-protocol
Usage: show ip forward-protocol [vlan <VLAN-ID>]
Description: Show server addresses where broadcast requests received by the
switch are to be forwarded based on congured port.
Next Available Option:
■ vlan -- Specify a vlan for which to show server addresses. (VLAN-ID) (p. 603)
552© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
To Next Page
Loading...
