HP ProCurve 5400zl

Show the list of devices that are stack members.
VIEW-NAME
■ show snmpv3 view VIEW-NAME
Set view name.
Next Available Option:
■ SUB-TREE -- Set the OID of the tree. (ASCII-STR) (p. 596)
virtual-link
■ show ip ospf virtual-link
Usage: show ip ospf virtual-link [IP-ADDR] [area OSPF-AREA-ID]
Description: Show status of all OSPF virtual links congured.
The 'IP-ADDR' can be specied to display detailed
information for a particular virtual neighbor. If
the area is specied only virtual links of the
area are shown.
Next Available Options:
■ vlink-ip -- Router ID of the link destination for which to show detailed information. (IP-ADDR)
(p. 608)
■ area -- Specify area of the virtual links to show. (OSPF-AREA-ID) (p. 529)
virtual-neighbor
■ show ip ospf virtual-neighbor
Usage: show ip ospf virtual-neighbor [IP-ADDR]
[area OSPF-AREA-ID]
Description: Show all virtual neighbors of the device.
The 'IP-ADDR' can be specied to display detailed
information for a particular virtual neighbor. If
the area is specied only virtual neighbors belonging
to the area are shown.
Next Available Options:
■ vneighbor-ip -- Router ID of the virtual neighbor for which to show detailed information.
(IP-ADDR) (p. 608)
■ area -- Specify area of the virtual neighbors to show. (OSPF-AREA-ID) (p. 529)
vlan
■ show access-list vlan VLAN-ID
Show ACLs applied to the specied VLAN.
■ show arp vlan VLAN-ID
Specify VLAN for which to show ARP entries.
603© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide