HP ProCurve 5400zl

advertise
■ show ip ospf external-link-state advertise
Show each LSA as a stream of bytes in hexadecimal notation.
■ show ip ospf link-state advertise
Show each LSA as a stream of bytes in hexadecimal notation.
agent
■ show sflow agent
Displays read-only switch agent information: The agent address is normally the ip
address of the rst vlan congured.
alias
■ show alias
Usage: show alias
Description: Show congured alias commands.
all
■ show rate-limit all
Show limits for all trafc.
Next Available Options:
■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p. 578)
■ detailed -- Show Inbound Radius Override details.(p. 546)
■ show stack all
Show information about all the stacks available on the LAN.
■ show tech all
Usage: show tech [all|custom|buffers|instrumentation|mesh|route|statistics
|transceivers|vrrp]
Description: Display output of a predened command sequence used by
technical support.
all-hosts
■ show connection-rate-filter all-hosts
Show blocked and throttled IP addresses.
area
■ show ip ospf area
529© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide