Next Available Option:
â– group < ManagerPriv | ManagerAuth | OperatorAuth | ... > -- Show SNMPv3 users. (p. 553)
accounting
â– show accounting
Usage: show accounting [sessions]
Description: Show Accounting conguration parameters.
If 'sessions' is specied then show accounting
data for all active sessions.
Next Available Option:
â– sessions -- Show accounting data for all active sessions(p. 590)
â– show radius accounting
Usage: show radius accounting
Description: Show RADIUS accounting statistics.
acl-name
â– show access-list ACL-NAME
Display detailed information on specied ACL.
Next Available Option:
â– config -- Show all configured ACL's on the switch using the CLI syntax used to create them.
(p. 540)
â– show statistics < aclv4 > ACL-NAME
Enter the name of acl/policy.
Next Available Options:
â– vlan -- Enter the statistics vlan. (VLAN-ID) (p. 603)
â– port -- Enter the statistics port. ([ethernet] PORT-NUM) (p. 577)
â– show statistics < aclv6 > ACL-NAME
Enter the name of acl/policy.
Next Available Options:
â– vlan -- Enter the statistics vlan. (VLAN-ID) (p. 603)
â– port -- Enter the statistics port. ([ethernet] PORT-NUM) (p. 577)
address-table-port
â– show mac-address [ETHERNET] PORT-LIST
Show MAC addresses learned on the specied ports.
528© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide