COMMAND DETAILS
severity (p. 366)ip-address (p. 365)control-descr (p. 364)
system-module (p. 366)priority-descr (p. 365)facility (p. 364)
control-descr
â– [no] logging IP-ADDR control-descr
Usage: [no] logging <IP-ADDR> [control-descr <text string>]
Description: A text string associated with the given IP-ADDr.
'no' replaces the string with a zero length string.
The length of the string is limited to 255 characters.
Next Available Option:
â– control-descr -- A text string associated with the given IP-ADDr (ASCII-STR) (p. 364)
â– logging IP-ADDR control-descr CONTROL-DESCR
Usage: [no] logging <IP-ADDR> [control-descr <text string>]
Description: A text string associated with the given IP-ADDr.
'no' replaces the string with a zero length string.
The length of the string is limited to 255 characters.
facility
â– [no] logging facility < kern | user | mail | ... >
Usage: [no] logging facility <facility>
Description: Specify the syslog facility value that will be used
for all syslog servers. Syslog facility determines
where syslog servers should log the syslog message.
Supported Values:
â– kern
â– user
â– mail
â– daemon
â– auth
â– syslog
â– lpr
â– news
â– uucp
â– sys9
â– sys10
â– sys11
â– sys12
â– sys13
â– sys14
â– cron
â– local0
â– local1
â– local2
364© 2009 Hewlett-Packard Development Company, L.P.
loggingCommand Line Interface Reference Guide