HP ProCurve 5400zl

log
OVERVIEW
Switch ManagementCategory:
managerPrimary context:
logging (page 363)Related Commands
the section called “logging” (page 567)
Usage: log [-a|-r|-m|-p|-w|-i|-d|substring ...]
Description: Display log events.
-a - Instructs the switch to display all recorded log
events, which includes events from previous boot cycles.
-r - Instructs the switch to display recorded
log events in reverse order (most recent rst).
substring - Instructs the switch to display
only those events that match the substring.
The remaining event class options (listed below in
order of severity - lowest severity rst) conne
output to event clases of equal or higher severity
-d - Debug
-i - Informative
-w - Warnings
-p - Performance
-m - Major
Only one of options -d,-i,-w,-p and -m may be specied.
The -a, -r, and substring options may be used in
combination with an event class option.
COMMAND STRUCTURE
■ log -a -- Display all log events, including those from previous boot cycles. (p. 361)
■ log event_class < -M | -P | -W | ... > -- Specify substring to match in log entry. See 'log help' for
details. (p. 361)
■ log option -- Specify substring to match in log entry. See 'log help' for details. (ASCII-STR) (p. 362)
■ log -r -- Display log events in reverse order (most recent first). (p. 362)
COMMAND DETAILS
option (p. 362)-a (p. 361)
-r (p. 362)event_class (p. 361)
-a
■ log -a
Display all log events, including those from previous boot cycles.
event_class
■ log
Specify substring to match in log entry. See 'log help' for details.
361© 2009 Hewlett-Packard Development Company, L.P.