HP ProCurve 5400zl

■ probes < 1 to 5 > -- Number of Probes <1-5>. (p. 692)
■ timeout < 1 to 120 > -- Traceroute timeout in seconds <1-120>. (p. 693)
■ vlan -- Source VLAN. (VLAN-ID) (p. 693)
■ maxttl < 1 to 255 > -- Maximum time to live <1-255>. (p. 692)
■ minttl < 1 to 255 > -- Minimum time to live <1-255>. (p. 692)
■ probes < 1 to 5 > -- Number of Probes <1-5>. (p. 692)
■ timeout < 1 to 120 > -- Traceroute timeout in seconds <1-120>. (p. 693)
EXAMPLES
Example: traceroute IP-ADDR
Trace the route to the device that has IP address 10.168.1.146:
ProCurve# traceroute 10.168.1.146
traceroute to 10.168.1.146 ,
1 hop min, 30 hops max, 5 sec. timeout, 3 probes
1 10.57.191.129 2 ms 3 ms 3 ms
2 10.57.232.1 4 ms 2 ms 3 ms
3 10.168.1.146 4 ms 3 ms 3 ms
COMMAND DETAILS
timeout (p. 693)minttl (p. 692)host-name (p. 691)
vlan (p. 693)probes (p. 692)ip-addr (p. 691)
source (p. 693)maxttl (p. 692)
host-name
■ traceroute HOST-NAME
Hostname of the destination device.
Next Available Options:
■ minttl < 1 to 255 > -- Minimum time to live <1-255>.(p. 692)
■ maxttl < 1 to 255 > -- Maximum time to live <1-255>.(p. 692)
■ timeout < 1 to 120 > -- Traceroute timeout in seconds <1-120>.(p. 693)
■ probes < 1 to 5 > -- Number of Probes <1-5>.(p. 692)
ip-addr
■ traceroute IP-ADDR
Destination IPv4 address.
Next Available Options:
■ minttl < 1 to 255 > -- Minimum time to live <1-255>.(p. 692)
■ maxttl < 1 to 255 > -- Maximum time to live <1-255>.(p. 692)
■ timeout < 1 to 120 > -- Traceroute timeout in seconds <1-120>.(p. 693)
■ probes < 1 to 5 > -- Number of Probes <1-5>.(p. 692)
■ traceroute source IP-ADDR
Source IPv4 address.
691© 2009 Hewlett-Packard Development Company, L.P.
tracerouteCommand Line Interface Reference Guide