HP ProCurve 5400zl User Manual

■ [no] ip source-binding -- Add/remove a static IP-to-MAC binding in the DHCP snooping database
(p. 308)
■ trap -- Set traps for dynamic ip lockdown (p. 311)
■ OutOfResources -- Set out-of-resources trap. (p. 305)
■ vlan -- (VLAN-ID) (p. 312)
■ ip -- (IP-ADDR) (p. 302)
■ mac -- (MAC-ADDR) (p. 304)
■ interface -- ([ethernet] PORT-NUM) (p. 301)
■ [no] ip source-lockdown -- Enable/disable IP source lockdown in global configuration mode (p.
309)
■ portlist -- Specify the ports on which ip source-lockdown need to be implemented. ([ethernet]
PORT-LIST) (p. 305)
■ [no] ip source-route -- Enable/disable forwarding of source routed packets (p. 309)
■ [no] ip ssh -- Enable/disable SSH server on the device or set various SSH server parameters (p.
309)
■ cipher < aes128-cbc | 3des-cbc | aes192-cbc | ... > -- Specify a cipher to enable/disable. (p. 296)
■ filetransfer -- Enable/disable secure file transfer capability. (p. 299)
■ mac < hmac-md5 | hmac-sha1 | hmac-sha1-96 | ... > -- Specify a mac to enable/disable. (p. 304)
■ port -- Specify the TCP port on which the daemon should listen for SSH connections. (p. 305)
■ default -- Specify that the daemon should listen on the default TCP port (22). (p. 297)
■ IP-PORT -- Specify the TCP port number on which the daemon should listen. (TCP/UDP-PORT)
(p. 303)
■ public-key < manager | operator > -- Configure a client public-key. (NUMBER) (p. 306)
■ keystring -- ASCII formatted public-key. (ASCII-STR) (p. 303)
■ timeout < 5 to 120 > -- Specify the maximum length of time (seconds) permitted for protocol
negotiation and authentication. (NUMBER) (p. 311)
■ [no] ip timep -- Configure the method to acquire the Timep server address (p. 311)
■ dhcp -- Use DHCP to acquire Timep server address. (p. 297)
■ interval < 1 to 9999 > -- Specify how often (in minutes) the switch tries to get the current
time. (p. 301)
■ manual -- Manually configure the Timep server address. (p. 304)
■ server -- Timep server IPv4 address. (IP-ADDR) (p. 308)
■ interval < 1 to 9999 > -- Specify how often (in minutes) the switch tries to get the current
time. (p. 301)
■ serverV6 -- Timep server IPv6 address. (IPV6-ADDR) (p. 308)
■ interval < 1 to 9999 > -- Specify how often (in minutes) the switch tries to get the current
time. (p. 301)
■ ip ttl < 2 to 255 > -- Specify TTL for outgoing IP packets (NUMBER) (p. 312)
■ [no] ip udp-bcast-forward -- Enable/disable UDP broadcast forwarding (p. 312)
■ [no] ip zero-broadcast -- Enable/disable usage of zero broadcast IP Address (p. 312)
COMMAND DETAILS
public-key (p. 306)high-priority-forward (p. 300)access (p. 293)
querier (p. 306)icmp (p. 300)access-list (p. 293)
redirects (p. 306)igmp (p. 300)access-method (p. 294)
reject (p. 306)increment (p. 301)address (p. 294)
reply-limit (p. 306)infinite (p. 301)addrmask (p. 294)
resequence (p. 307)interface (p. 301)arp-age (p. 294)
route (p. 307)interval (p. 301)authorized-managers (p. 295)
router-id (p. 307)ip (p. 302)auto (p. 296)
routing (p. 308)ip6addr (p. 302)blackhole (p. 296)
server (p. 308)ipaddr (p. 302)blocked (p. 296)
292© 2009 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English