HP ProCurve 5400zl

Next Available Option:
■ start-seq-num < 1 to 2147483647 > -- Specify the starting sequence number. (p. 310)
■ [no] ip access-list connection-rate-filter NAME
Specify name of Access Control List to congure.
number
■ [no] ip access-list extended < 100 to 199 >
Specify Access Control List to congure by number.
Range: < 100 to 199 >
■ [no] ip access-list standard < 1 to 99 >
Specify Access Control List to congure by number.
Range: < 1 to 99 >
OutOfResources
■ [no] ip source-binding trap OutOfResources
Set out-of-resources trap.
port
■ ip ssh port
Specify the TCP port on which the daemon should listen for SSH connections.
Next Available Options:
■ IP-PORT -- Specify the TCP port number on which the daemon should listen. (TCP/UDP-PORT)
(p. 303)
■ default -- Specify that the daemon should listen on the default TCP port (22).(p. 297)
portlist
■ [no] ip source-lockdown [ETHERNET] PORT-LIST
Specify the ports on which ip source-lockdown need to be implemented.
preserve
■ ip preserve
priority
■ [no] ip dns server-address priority < 1 to 2 >
Priority of Server Address.
Range: < 1 to 2 >
Next Available Options:
■ ipaddr -- DNS server IP address. (IP-ADDR) (p. 302)
■ ip6addr -- DNS server IPv6 address. (IPV6-ADDR) (p. 302)
305© 2009 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide