HP ProCurve 5400zl

Specify how often (in minutes) the switch tries to get the current time.
Range: < 1 to 9999 >
ip
■ ip source-binding VLAN-ID IP-ADDR
Next Available Option:
■ mac -- (MAC-ADDR) (p. 304)
ip6addr
■ [no] ip dns server-address priority < 1 to 2 > IPV6-ADDR
DNS server IPv6 address.
ipaddr
■ ip default-gateway IP-ADDR
IPv4 address of the default gateway.
■ [no] ip dns server-address priority < 1 to 2 > IP-ADDR
DNS server IP address.
■ ip router-id IP-ADDR
Usage: ip router-id IP-ADDR
[no] ip router-id
Description: Dene the device router id.
The no form of the command clears the router-id.
ip-addr
■ [no] ip address IP-ADDR/MASK-LENGTH
Interface IP address/mask.
■ ip route IP-ADDR/MASK-LENGTH
Specify IP address and mask of the route destination.
Next Available Options:
■ ip-addr -- Specify gateway IP address. (IP-ADDR) (p. 302)
■ vlan -- Specify the destination VLAN. (VLAN-ID) (p. 312)
■ reject -- Specify that packets are discarded and ICMP error is returned to sender.(p. 306)
■ blackhole -- Specify that packets are silently discarded with no ICMP message sent.(p. 296)
■ [no] ip route IP-ADDR/MASK-LENGTH IP-ADDR
Specify gateway IP address.
Next Available Option:
■ distance < 1 to 255 > -- Set the administrative distance to associate with this static route.(p.
298)
302© 2009 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide