HP ProCurve 5400zl

Usage: [no] ip source-binding trap OutOfResources
Description: Set traps for dynamic ip lockdown.
Next Available Option:
■ OutOfResources -- Set out-of-resources trap. (p. 305)
ttl
■ ip ttl < 2 to 255 >
Usage: ip ttl <2-255>
Description: Specify TTL for outgoing IP packets.
Range: < 2 to 255 >
udp-bcast-forward
■ [no] ip udp-bcast-forward
Usage: [no] ip udp-bcast-forward
Description: Enable/disable UDP broadcast forwarding.
unreachable
■ [no] ip icmp unreachable
Usage: [no] ip icmp unreachable
Description: Enable/disable destination unreachable error messages.
vlan
■ ip source-binding VLAN-ID
Next Available Option:
■ ip -- (IP-ADDR) (p. 302)
■ [no] ip route IP-ADDR/MASK-LENGTH vlan VLAN-ID
Specify the destination VLAN.
Next Available Option:
■ distance < 1 to 255 > -- Set the administrative distance to associate with this static route.(p.
298)
zero-broadcast
■ [no] ip zero-broadcast
Usage: [no] ip zero-broadcast
Description: Enable/disable usage of zero broadcast IP Address.
312© 2009 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide