HP ProCurve 5400zl

COMMAND DETAILS
sec-model (p. 631)max-msg-size (p. 628)addr-mask (p. 625)
sec-model12c (p. 631)message-processing (p. 628)auth (p. 625)
sec-name (p. 631)name (p. 628)authpassword (p. 625)
tag (p. 631)notify (p. 628)authprotocol (p. 625)
taglist (p. 631)only (p. 629)community (p. 626)
tagvalue (p. 632)params (p. 629)enable (p. 626)
targetaddress (p. 632)port-mask (p. 629)engineid (p. 626)
timeout (p. 632)priv (p. 629)filter (p. 626)
udp-port (p. 632)privpassword (p. 630)group (p. 627)
user (p. 632)privprotocol (p. 630)index (p. 627)
username (p. 633)restricted-access (p. 630)ipaddr (p. 627)
ver3 (p. 633)retries (p. 630)ipv6addr (p. 627)
addr-mask
■ snmpv3 targetaddress TARGETADDRESS params PARAMS IP-ADDR addr-mask IP-ADDR
Set range of transport addresses with this mask.
■ snmpv3 targetaddress TARGETADDRESS params PARAMS IPV6-ADDR addr-mask IP-ADDR
Set range of transport addresses with this mask.
auth
■ snmpv3 user USERNAME auth
Set authentication paramaters.
Next Available Options:
■ authpassword -- Set authentication password. (ASCII-STR) (p. 625)
■ authprotocol < MD5 | SHA > -- Set authentication protocol. (p. 625)
authpassword
■ snmpv3 user USERNAME auth AUTHPASSWORD
Set authentication password.
Next Available Option:
■ priv -- Set Privacy password. (p. 629)
■ snmpv3 user USERNAME auth < MD5 | SHA > AUTHPASSWORD
Set authentication password.
Next Available Option:
■ priv -- Set Privacy password. (p. 629)
authprotocol
■ snmpv3 user USERNAME auth < MD5 | SHA >
625© 2009 Hewlett-Packard Development Company, L.P.
snmpv3Command Line Interface Reference Guide