HP ProCurve 5400zl

privpassword
■ snmpv3 user USERNAME auth AUTHPASSWORD priv PRIVPASSWORD
Set Privacy password.
■ snmpv3 user USERNAME auth AUTHPASSWORD priv < DES | AES > PRIVPASSWORD
Set Privacy password.
■ snmpv3 user USERNAME auth < MD5 | SHA > AUTHPASSWORD priv PRIVPASSWORD
Set Privacy password.
■ snmpv3 user USERNAME auth < MD5 | SHA > AUTHPASSWORD priv < DES | AES >
PRIVPASSWORD
Set Privacy password.
privprotocol
■ snmpv3 user USERNAME auth AUTHPASSWORD priv < DES | AES >
Set privacy protocol.
Supported Values:
■ DES -- Set the privacy protocol to des.
■ AES -- Set the privacy protocol to aes-128.
Next Available Option:
■ privpassword -- Set Privacy password. (ASCII-STR) (p. 630)
■ snmpv3 user USERNAME auth < MD5 | SHA > AUTHPASSWORD priv < DES | AES >
Set privacy protocol.
Supported Values:
■ DES -- Set the privacy protocol to des.
■ AES -- Set the privacy protocol to aes-128.
Next Available Option:
■ privpassword -- Set Privacy password. (ASCII-STR) (p. 630)
restricted-access
■ [no] snmpv3 restricted-access
Congure SNMPv1 and SNMPv2c access properties.
retries
■ snmpv3 targetaddress TARGETADDRESS params PARAMS IP-ADDR retries < 0 to 255 >
Set retries value; default is 3.
Range: < 0 to 255 >
630© 2009 Hewlett-Packard Development Company, L.P.
snmpv3Command Line Interface Reference Guide