HP ProCurve 5400zl User Manual

■ snmpv3 targetaddress TARGETADDRESS params PARAMS IPV6-ADDR retries < 0 to 255 >
Set retries value; default is 3.
Range: < 0 to 255 >
sec-model
■ [no] snmpv3 group < ManagerPriv | ManagerAuth | OperatorAuth | ... > user USER sec-model
< ver1 | ver2c | ver3 >
Set security model to be used.
Supported Values:
■ ver1 -- SNMP version 1 security model.
■ ver2c -- SNMP version v2c security model.
■ ver3 -- SNMP version 3 security model.
■ snmpv3 params PARAMS user USER sec-model
Set security model.
Next Available Options:
■ sec-model12c < ver1 | ver2c > -- Configure SNMPv3 User entry.(p. 631)
■ ver3 -- SNMP version 3 security model.(p. 633)
sec-model12c
■ snmpv3 params PARAMS user USER sec-model < ver1 | ver2c >
Congure SNMPv3 User entry.
Supported Values:
■ ver1 -- SNMP version 1 security model.
■ ver2c -- SNMP version 2c security model.
Next Available Option:
■ message-processing < ver1 | ver2c | ver3 > -- Set message processing model value. (p. 628)
sec-name
■ snmpv3 community index INDEX name NAME sec-name SEC-NAME
Set security name.
Next Available Option:
■ tag -- Set tag value for the community (ASCII-STR) (p. 631)
tag
■ snmpv3 community index INDEX name NAME sec-name SEC-NAME tag TAG
Set tag value for the community
taglist
■ snmpv3 targetaddress TARGETADDRESS params PARAMS IP-ADDR taglist TAGLIST
631© 2009 Hewlett-Packard Development Company, L.P.
snmpv3Command Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English