HP ProCurve 5400zl

Next Available Option:
■ sec-model -- Set security model. (p. 631)
■ [no] snmpv3 user
Congure SNMPv3 User entry.
Next Available Option:
■ username -- Set authentication paramaters. (ASCII-STR) (p. 633)
username
■ snmpv3 user USERNAME
Set authentication paramaters.
Next Available Option:
■ auth -- Set authentication paramaters. (p. 625)
ver3
■ snmpv3 params PARAMS user USER sec-model ver3
SNMP version 3 security model.
Next Available Option:
■ message-processing -- Set message processing model value. (p. 628)
■ snmpv3 params PARAMS user USER sec-model ver3 message-processing ver3 < noauth | auth
| priv >
Set security level.
Supported Values:
■ noauth -- no authentication (and no privacy)
■ auth -- authentication (no privacy)
■ priv -- authentication and privacy
633© 2009 Hewlett-Packard Development Company, L.P.
snmpv3Command Line Interface Reference Guide