public-key
â– ip ssh public-key < manager | operator >
Conîš¿gure a client public-key.
Supported Values:
â– manager -- Select manager public keys.
â– operator -- Select operator public keys.
Next Available Option:
â– keystring -- ASCII formatted public-key. (ASCII-STR) (p. 303)
querier
â– [no] ip igmp querier
Usage: [no] ip igmp querier [interval <seconds>]
Description: Specify querier/non-querier capability for the VLAN. IGMP
queries are not sent when the mode is disabled. When
enabled, the device cannot become Querier for the subnet
unless the VLAN has an IP Address (use the 'show ip' command
to determine this). Each subnet must have at least one IGMP
Querier-capable device in order for IGMP to function
properly. The querier interval setting modiîš¿es the time (in
seconds) between IGMP queries.
Next Available Option:
â– interval < 5 to 300 > -- Sets the interval in seconds between IGMP queries (default: 125) (p. 301)
redirects
â– [no] ip icmp redirects
Usage: [no] ip icmp redirects
Description: Enable/disable redirect error messages.
reject
â– [no] ip route IP-ADDR/MASK-LENGTH reject
Specify that packets are discarded and ICMP error is returned to sender.
Next Available Option:
â– distance < 1 to 255 > -- Set the administrative distance to associate with this static route.(p.
298)
reply-limit
â– [no] ip icmp reply-limit
306© 2009 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General