EasyManuals Logo

HP ProCurve 5400zl User Manual

HP ProCurve 5400zl
765 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #309 background imageLoading...
Page #309 background image
Usage: ip icmp reply-limit
Description: Enable/disable ICMP reply rate limiting.
resequence
â–  ip access-list resequence
Renumber the entries in an Access Control List.
Next Available Option:
â–  name -- Specify name of Access Control List to configure. (ASCII-STR) (p. 304)
route
â–  [no] ip route
Usage: [no] ip route IP-ADDR/MASK-LENGTH
<IP-ADDR|vlan <vlan-id>|reject|blackhole> [distance <1-255>]
Description: Add or delete static routing table entries. A route
entry is identied by a destination (IP-ADDR/MASK-LENGTH)
and next-hop pair. The next-hop can be either a gateway IP
address or a vlan or the keyword 'reject' or 'blackhole':
- a gateway IP address indicates that the specied gateway
will be used to reach the destination. The gateway address is
not required to be directly reachable on one of local subnets.
If the gateway address is not directly reachable, the route
will be added to the routing table as soon as a route to the
gateway address is learned.
If the gateway address is one of local interface addresses,
the destination is treated as if it is directly connected to
the specied interface.
- the keyword 'vlan' followed by the vlan-id indicates the
destination vlan for that route.
- the keyword 'reject' indicates that if this route is matched,
a packet to the destination is discarded and a notication
(e.g. ICMP error) is returned to the packet sender.
- the keyword 'blackhole' indicates that if this route is matched,
a packet to the destination is silently discarded and no
notication (e.g. ICMP error) is returned to the packet sender.
- the optional keyword 'distance' is used to specify the
administrative distance for the route.
If the route command is preceded by 'no' the command deletes
the route for the specied destination next-hop pair.
Next Available Option:
â–  ip-addr -- Specify IP address and mask of the route destination. (IP-ADDR/MASK-LENGTH) (p.
302)
router-id
â–  [no] ip router-id
Usage: ip router-id IP-ADDR
[no] ip router-id
307© 2009 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide

Table of Contents

Other manuals for HP ProCurve 5400zl

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProCurve 5400zl and is the answer not in the manual?

HP ProCurve 5400zl Specifications

General IconGeneral
BrandHP
ModelProCurve 5400zl
CategorySwitch
LanguageEnglish

Related product manuals