HP ProCurve 5400zl

Description: Dene the device router id.
The no form of the command clears the router-id.
Next Available Option:
■ ipaddr -- Define the device router id (IP-ADDR) (p. 302)
routing
■ [no] ip routing
Usage: [no] ip routing
Description: Enable/disable IP routing support on the device.
server
■ ip timep manual IP-ADDR
Timep server IPv4 address.
Next Available Option:
■ interval < 1 to 9999 > -- Specify how often (in minutes) the switch tries to get the current time.(p.
301)
server-address
■ [no] ip dns server-address
Congure DNS server IP address.
Next Available Option:
■ priority < 1 to 2 > -- Priority of Server Address. (NUMBER) (p. 305)
serverV6
■ ip timep manual IPV6-ADDR
Timep server IPv6 address.
Next Available Option:
■ interval < 1 to 9999 > -- Specify how often (in minutes) the switch tries to get the current time.(p.
301)
source-binding
■ [no] ip source-binding
Usage: [no] ip source-binding <VLAN-ID> <MAC-ADDR> <IP-ADDR>
[ethernet] <PORT-NUM>
Description: Add/remove a static IP-to-MAC binding in the DHCP snooping
database.
Parameters:
308© 2009 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide