To Next Page

To Previous Page

function unless SSH is also enabled.

o 'port <<1-65535>|default>' - Set the TCP port on which the

daemon should listen for SSH connections. The default is 22.

o 'public-key <operator|manager> KEYSTRING' - set a key for

public-key authentication. The KEYSTRING parameter must be

enclosed in quotes--either"KEYSTRING" or 'KEYSTRING'.

Newlines may be escaped with a backslash.

o 'ip-version <4|6|4or6>' - Select the IP mode to run in.

'ip-version 4' will only accept connections from IPv4

clients. 'ip-version 6' will only accept connections from

IPv6 clients. 'ip-version 4or6' accept connections from

both IPv4 and IPv6 clients. default is 'ip-version 4or6'.

o 'timeout <5-120>' - Set the maximum length of time in

seconds permitted for initial protocol negotiation and

authentication. The default is 120 seconds.

o 'cipher CIPHER' - Enable or disable the specied cipher.

By default, all available ciphers are enabled.

o 'mac MAC' - Enable or disable the specied mac. By default,

all available macs are enabled.

Next Available Options:

■ filetransfer -- Enable/disable secure file transfer capability.(p. 299)

■ port -- Specify the TCP port on which the daemon should listen for SSH connections.(p. 305)

■ public-key < manager | operator > -- Configure a client public-key. (NUMBER) (p. 306)

■ timeout < 5 to 120 > -- Specify the maximum length of time (seconds) permitted for protocol

negotiation and authentication. (NUMBER) (p. 311)

■ cipher < aes128-cbc | 3des-cbc | aes192-cbc | ... > -- Specify a cipher to enable/disable.(p. 296)

■ mac < hmac-md5 | hmac-sha1 | hmac-sha1-96 | ... > -- Specify a mac to enable/disable.(p. 304)

standard

■ [no] ip access-list standard

Congure a standard Access Control List.

Next Available Options:

■ name -- Specify name of Access Control List to configure. (ASCII-STR) (p. 304)

■ number < 1 to 99 > -- Specify Access Control List to configure by number. (p. 305)

start-seq-num

■ ip access-list resequence NAME < 1 to 2147483647 >

Specify the starting sequence number.

Range: < 1 to 2147483647 >

Next Available Option:

■ increment < 1 to 2147483646 > -- Specify the increment. (p. 301)

ipCommand Line Interface Reference Guide

HP ProCurve 5400zl User Manual

Other manuals for HP ProCurve 5400zl