Next Available Option:
â– domain-name -- Default domain suffix. (ASCII-STR) (p. 298)
â– ip dns domain-name DOMAIN-NAME
Default domain sufîš¿x.
echo
â– [no] ip icmp echo
Usage: [no] ip icmp echo ...
Description: Enable/disable echo replies to broadcast echo requests.
Next Available Option:
â– broadcast-request < Min | Max > -- Enable/disable echo replies to broadcast echo requests(p.
296)
extended
â– [no] ip access-list extended
Conîš¿gure an extended Access Control List.
Next Available Options:
â– name -- Specify name of Access Control List to configure. (ASCII-STR) (p. 304)
â– number < 100 to 199 > -- Specify Access Control List to configure by number. (p. 305)
fastleave
â– [no] ip igmp fastleave [ETHERNET] PORT-LIST
Usage: [no] ip igmp fastleave [ethernet] PORT-LIST
Description: Enables or disables IGMP Fast Leaves. When enabled, as soon as
an IGMP Group Leave has been received on a non-cascaded port,
the switch stops forwarding multicast trafîš¿c for that group
to that port.
Does not apply to cascaded ports (see ip igmp forcedfastleave).
When disabled, or when the port is cascaded, the regular IGMP
leave time is used (up to 10 seconds when the switch is not
the IGMP Querier).
The default behavior is for IGMP FastLeaves to be enabled.
This feature is conîš¿gured for ports on a per-VLAN basis.
filetransfer
â– [no] ip ssh filetransfer
Enable/disable secure îš¿le transfer capability.
forcedfastleave
â– [no] ip igmp forcedfastleave [ETHERNET] PORT-LIST
299© 2009 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General