■ routers -- Show the IPv6 Router table entries(p. 587)
■ route -- Show the IPv6 routing table(p. 587)
■ nd -- Show the IPv6 Neighbor Discovery settings(p. 573)
■ mld -- Invoked without any parameters, shows per-VLAN MLD status, or, if VLANs are disabled
displays the global MLD status(p. 570)
■ neighbors -- Displays information on the IPv6 neighbor discovery cache(p. 573)
■ authorized-managers -- Show IPV6 addresses allowed to manage the switch(p. 532)
■ show class ipv6 IPV6
Enter ipv6 class.
ipv6-addr
■ show ipv6 route IPV6-ADDR
Destination IPv6 address to display the routes to.
■ show ipv6 mld vlan VLAN-ID group IPV6-ADDR
Show MLD VLAN group address information.
irdp
■ show ip irdp
Usage: show ip irdp
Description: Show IRDP (ICMP Router Discovery Protocol) settings.
ist
■ show spanning-tree [ETHERNET] PORT-LIST config instance ist
Show the information for the internal spanning tree (IST) instance.
■ show spanning-tree [ETHERNET] PORT-LIST instance ist
Show the information for the internal spanning tree (IST) instance.
Next Available Option:
■ detail -- Show spanning tree extended details Port, Bridge, Rx, and Tx report.(p. 546)
■ show spanning-tree config instance ist
Show the information for the internal spanning tree (IST) instance.
■ show spanning-tree instance ist
Show the information for the internal spanning tree (IST) instance.
Next Available Option:
■ detail -- Show spanning tree extended details Port, Bridge, Rx, and Tx report.(p. 546)
■ show spanning-tree pending instance ist
563© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
To Next Page
Loading...
