HP ProCurve 5400zl

Next Available Options:
■ cst -- Show CST Root changes history.(p. 544)
■ ist -- Show IST Regional Root changes history.(p. 563)
■ msti < 1 to 16 > -- Show MSTI Regional Root changes history. (NUMBER) (p. 572)
route
■ show ip route
Usage: show ip route [IP-ADDR] [static|connected|rip|ospf]
Description: Show the IP routing table.
The output may be restricted to a specic destination or
type of route.
Next Available Options:
■ ip-addr -- Destination IP address to display the routes to. (IP-ADDR) (p. 561)
■ type < static | connected | rip | ... > -- Specify type of routes to display.(p. 600)
■ show ipv6 route
Usage: show ipv6 route [IPV6-ADDR] [static|connected|ospf]
Description: Show the IPv6 routing table.
The output may be restricted to a specic destination or
type of route.
Next Available Options:
■ ipv6-addr -- Destination IPv6 address to display the routes to. (IPV6-ADDR) (p. 563)
■ type < connected > -- Specify type of routes to display.(p. 600)
■ show tech route
Usage: show tech [all|custom|buffers|instrumentation|mesh|route|statistics
|transceivers|vrrp]
Description: Display output of a predened command sequence used by
technical support.
router-id
■ show ip ospf external-link-state router-id IP-ADDR
Show LSAs with the specied Router ID only.
■ show ip ospf link-state router-id IP-ADDR
Show LSAs with the specied Router ID only.
routers
■ show ipv6 routers
587© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide