HP ProCurve 5400zl

Usage: show ipv6 routers vlan <VLANID>
Description: Show the IPv6 Router table entries.
Next Available Option:
■ vlan -- Show the IPv6 Router Table Entries for VLAN.(p. 603)
rp-candidate
■ show ip pim rp-candidate
Usage: show ip pim rp-candidate [cong]
Description: Show Candidate-RP operational and conguration information.
When invoked without parameter shows current operational status
of the Candidate-RP.
Next Available Option:
■ config -- Show C-RP configuration information. (p. 540)
rp-pending
■ show ip pim rp-pending
Show (*,*,RP) Join Pending Information.
rp-set
■ show ip pim rp-set
Usage: show ip pim rp-set [static|learned]
Description: Show RP-Set information available on the router.
When invoked without parameters shows all statically congured
and dynamically learned entries. If keyword 'static' is specied
the information about statically congured entries is shown.
If keyword 'learned' is specied the information learned from
the BSR is shown.
Next Available Options:
■ static -- Show statically configured RP-Set information. (p. 594)
■ learned -- Show RP-Set information learned from the BSR. (p. 565)
running-config
■ show running-config
Usage: show running-cong [status]
Description: Show the switch running conguration. If the status
keyword is specied check if there are changes in running
conguration not saved to startup conguration le.
Next Available Option:
■ status -- Check if the running configuration differs from the statup configuration.(p. 596)
588© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide