HP ProCurve 5400zl

msti
■ show spanning-tree root-history msti < 1 to 16 >
Show MSTI Regional Root changes history.
Range: < 1 to 16 >
MSTID
■ show spanning-tree [ETHERNET] PORT-LIST config instance < 1 to 16 >
Spanning tree instance ID for which to show the information.
Range: < 1 to 16 >
■ show spanning-tree [ETHERNET] PORT-LIST instance < 1 to 16 >
Spanning tree instance ID for which to show the information.
Range: < 1 to 16 >
Next Available Option:
■ detail -- Show spanning tree extended details Port, Bridge, Rx, and Tx report.(p. 546)
■ show spanning-tree config instance < 1 to 16 >
Spanning tree instance ID for which to show the information.
Range: < 1 to 16 >
■ show spanning-tree instance < 1 to 16 >
Spanning tree instance ID for which to show the information.
Range: < 1 to 16 >
Next Available Option:
■ detail -- Show spanning tree extended details Port, Bridge, Rx, and Tx report.(p. 546)
■ show spanning-tree pending instance < 1 to 16 >
Spanning tree instance ID for which to show the information.
Range: < 1 to 16 >
name
■ show monitor name
Mirror destination name.
■ show name
Usage: show name [[ethernet] PORT-LIST]
Description: Show names assigned to the ports. If the PORT-LIST is not
specied the default is to list all of the ports.
Next Available Option:
■ port-list -- Show names assigned to the ports ([ethernet] PORT-LIST) (p. 578)
572© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide