IP-ADDR
â– show ip mroute IP-ADDR
Usage: show ip mroute [GRP-ADDR SRC-ADDR]
Description: Show detailed information for the speciîš¿ed entry from the IP
multicast routing table. GRP-ADDR is the IP multicast group
address and SRC-ADDR is the source IP address of the entry.
Next Available Option:
â– IP-ADDR -- Specify the source IP address of the MRT entry. (IP-ADDR) (p. 562)
â– show ip mroute IP-ADDR IP-ADDR
Specify the source IP address of the MRT entry.
â– show ip pim mroute IP-ADDR
Specify the IP multicast group address of the MRT entry.
Next Available Option:
â– IP-ADDR -- Specify the source IP address of the MRT entry. (IP-ADDR) (p. 562)
â– show ip pim mroute IP-ADDR IP-ADDR
Specify the source IP address of the MRT entry.
â– show ip pim neighbor IP-ADDR
Specify the IP address of the PIM neighbor to show.
ip-recv-mac-address
â– show ip-recv-mac-address
Show VLAN L3-Mac-Address table.
ipv4
â– show class ipv4 IPV4
Enter ipv4 class.
ipv6
â– show ipv6
Usage: show ipv6
Description: Show the device IPv6 conîš¿guration. Invoked without parameters
shows IPv6 conîš¿guration for the switch or all VLANs. When
followed by a parameter displays information for a particular
IPv6 protocol or feature. To get a list of all possible
parameters use 'show ipv6 ?'.
Next Available Options:
â– vlan -- Show IPv6 status information for all VLANs(p. 603)
562© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General