HP ProCurve 5400zl

■ receiver-index < 1 to 3 > -- Select one of the three possible sFlow receiver tables. (NUMBER)
(p. 584)
slave_time
■ show cpu slot SLOT-ID-RANGE < 1 to 90 >
Time (seconds) over which to average CPU utilization.
Range: < 1 to 90 >
slot
■ show cpu slot SLOT-ID-RANGE
Display module CPU statistics.
Next Available Option:
■ slave_time < 1 to 90 > -- Time (seconds) over which to average CPU utilization. (NUMBER) (p.
591)
■ show power-over-ethernet brief slot SLOT-ID-RANGE
Usage: show power-over-ethernet brief
Description: Show summary of poe status.
■ show power-over-ethernet slot SLOT-ID-RANGE
Usage: show power-over-ethernet [slot] <slotID>
Description: Show poe information of specied slot.
snmp-server
■ show snmp-server
Usage: show snmp-server [COMMUNITY-STR]
show snmp-server traps
Description: Display information on all SNMP communities, trap receivers and
Snmp response/trap source-ip policy congured on the switch. If
'COMMUNITY-STR' is specied, only information for that community
is displayed.
Next Available Options:
■ traps -- Show all configured traps.(p. 599)
■ community -- Specify SNMP community to which to restrict the output. (ASCII-STR) (p. 539)
snmpv3
■ show snmpv3
Show conguration of SNMPv3 features.
Next Available Options:
■ access-rights -- Show information about access rights. (p. 527)
591© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide