HP ProCurve 5400zl User Manual

Next Available Options:
■ authentication -- Show RADIUS authentication statistics(p. 531)
■ accounting -- Show RADIUS accounting statistics(p. 528)
■ dyn-authorization -- Show RADIUS dynamic authorization statistics(p. 549)
■ host -- Show statistics information for the RADIUS host (IP-ADDR) (p. 555)
rate-limit
■ show rate-limit
Usage: show rate-limit all [PORT-LIST] [detailed]
show rate-limit ip access-group [PORT-LIST]
show rate-limit icmp [PORT-LIST]
show rate-limit bcast [PORT-LIST] [detailed]
show rate-limit mcast [PORT-LIST] [detailed]
Description: Show rate limit maximum percentages. If PORT-LIST parameter is
specied, information is shown only for the specied ports.
Use 'all' to show limits applied to all trafc.
Use 'ip' to show limits applied to access control lists.
Use 'icmp' to show limits for ICMP trafc.
Use 'bcast' to show limits for Broadcast trafc.
Use 'mcast' to show limits for Multicast trafc.
Use 'detailed' to show Inbound Radius Override details.
Next Available Options:
■ icmp -- Show only limits for icmp traffic.(p. 556)
■ all -- Show limits for all traffic.(p. 529)
■ bcast -- Show limits for ingress broadcast traffic.(p. 534)
■ mcast -- Show limits for ingress multicast traffic.(p. 569)
receiver-index
■ show sflow < 1 to 3 >
Select one of the three possible sFlow receiver tables.
Range: < 1 to 3 >
Next Available Options:
■ destination -- Displays information about the receiver/collector/management-station to which
the sampling-polling data is sent.(p. 546)
■ sampling-polling -- Displays information about sampling and polling.(p. 589)
redistribute
■ show ip ospf redistribute
Usage: show ip ospf redistribute
Description: List protocols which are being redistributed into OSPF.
■ show ip rip redistribute
584© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English