HP ProCurve 5400zl

■ protocol-priority -- Show the protocol priority(p. 582)
■ tcp-udp-port-priority -- Show TCP/UDP port priorities(p. 598)
■ type-of-service -- Show QoS priorities based on IP Type-of-Service(p. 601)
■ vlan-priority -- Show the VLAN-based priority table(p. 607)
■ resources -- Show the qos resources(p. 585)
■ queue-config -- Displays outbound port queues configuration information. (p. 583)
queue-config
■ show qos queue-config
Displays outbound port queues conguration information.
-r
■ show debug buffer -r
Display messages in reverse order (most recent rst).
■ show logging -r
Display log events in reverse order (most recent rst).
radio-ports
■ show wireless-services SLOT-ID radio-ports
Display radio-ports associated with a wireless-services module.
■ show lldp auto-provision radio-ports
Show LLDP radio-ports information.
radius
■ show access-list radius [ETHERNET] PORT-LIST
Display ACLs applied via RADIUS.
■ show radius
Usage: show radius [authentication|accounting|dyn-authorization|host <IP-ADDR>]
Description: Show RADIUS status and statistics information. Invoked without
parameters shows general RADIUS conguration for the switch.
o authentication - show RADIUS authentication statistics information.
o accounting - show RADIUS accounting statistics information.
o dyn-authorization - show RADIUS dynamic authorization statistics
information.
o host <IP-ADDR> - show comprehensive statistics information for the
host.
583© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide