Next Available Option:
■ chain-name -- Specify key chain to use for MD5 authentication. (ASCII-STR) (p. 478)
metric-type
■ router ospf area OSPF-AREA-ID nssa < 0 to 16777215 > metric-type < type1 | type2 >
Metric type of the type-7 default.
Supported Values:
■ type1 -- Comparable (an OSPF metric plus the external metric).
■ type2 -- Non-comparable metric (the external metric).
■ router ospf area backbone nssa < 0 to 16777215 > metric-type < type1 | type2 >
Metric type of the type-7 default.
Supported Values:
■ type1 -- Comparable (an OSPF metric plus the external metric).
■ type2 -- Non-comparable metric (the external metric).
■ router ospf metric-type < type1 | type2 >
Usage: metric-type <type1|type2>
Description: The default metric type used for advertising external routes
imported into OSPF by this router.
Supported Values:
■ type1 -- Comparable (an OSPF metric plus the external metric).
■ type2 -- Non-comparable metric (the external metric).
no-advertise
■ router ospf area OSPF-AREA-ID range no-advertise
Do not advertise the range outside the area.
■ router ospf area backbone range no-advertise
Do not advertise the range outside the area.
normal
■ router ospf area OSPF-AREA-ID normal
Dene a "normal" area.
■ router ospf area backbone normal
Dene a "normal" area.
no-summary
■ router ospf area OSPF-AREA-ID nssa < 0 to 16777215 > no-summary
Do not send summary LSA into the area.
■ router ospf area OSPF-AREA-ID stub no-summary
Do not send summary LSA into the area.
482© 2009 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General
