■ backbone -- The backbone area (the same as 0.0.0.0).(p. 477)
area-id
■ router ospf area OSPF-AREA-ID
Single integer or IP address style dotted decimal.
Next Available Options:
■ normal -- Define a "normal" area.(p. 482)
■ nssa < 0 to 16777215 > -- Define a "not-so-stubby" area (or NSSA) and its cost.(p. 483)
■ stub -- Define a "stub" area and specify its cost.(p. 489)
■ range -- Summarize routes matching address/MASK pair.(p. 484)
■ virtual-link -- Specify a virtual neighbor. (IP-ADDR) (p. 492)
authentication
■ no router ospf area OSPF-AREA-ID virtual-link IP-ADDR authentication
Disable authentication.
■ no router ospf area backbone virtual-link IP-ADDR authentication
Disable authentication.
authentication-key
■ router ospf area OSPF-AREA-ID virtual-link IP-ADDR authentication-key
Set simple authentication method and key.
Next Available Option:
■ authentication-key -- OSPF authentication key (maximum 8 characters). (OCTET-STR) (p. 476)
■ router ospf area OSPF-AREA-ID virtual-link IP-ADDR authentication-key OCTET-STR
OSPF authentication key (maximum 8 characters).
■ router ospf area backbone virtual-link IP-ADDR authentication-key
Set simple authentication method and key.
Next Available Option:
■ authentication-key -- OSPF authentication key (maximum 8 characters). (OCTET-STR) (p. 476)
■ router ospf area backbone virtual-link IP-ADDR authentication-key OCTET-STR
OSPF authentication key (maximum 8 characters).
auto-summary
■ [no] router rip auto-summary
Usage: [no] auto-summary
476© 2009 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide
To Next Page
Loading...
