HP ProCurve 5400zl

Next Available Option:
■ dscp -- Define Differentiated Services Codepoint to which to map IP ToS.(p. 418)
integer-range
■ qos device-priority IP-ADDR dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos device-priority IP-ADDR/mask-LENGTH dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos device-priority IPV6-ADDR dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos device-priority IPV6-ADDR/PREFIX-LEN dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ [no] qos dscp-map < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
Next Available Options:
■ priority < 0 | 1 | 2 | ... > -- Specify priority to use. (p. 428)
■ name -- Specify DSCP->priority mapping name. (p. 426)
■ qos < udp-port | tcp-port > TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > range TCP/UDP-PORT TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv4 TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv4 range TCP/UDP-PORT TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv6 TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv6 range TCP/UDP-PORT TCP/UDP-PORT dscp < 0 to 63 >
423© 2009 Hewlett-Packard Development Company, L.P.
qosCommand Line Interface Reference Guide