■ name -- Specify DSCP->priority mapping name. (p. 426)
■ qos < udp-port | tcp-port > TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > range TCP/UDP-PORT TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv4 TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv4 range TCP/UDP-PORT TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv6 TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ipv6 range TCP/UDP-PORT TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ip-all TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
■ qos < udp-port | tcp-port > ip-all range TCP/UDP-PORT TCP/UDP-PORT dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
■ qos type-of-service diff-services < 0 to 63 > dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
■ qos type-of-service diff-services < 0 to 63 > dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
■ qos type-of-service diff-services < af11 | af12 | af13 | ... > dscp < 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
device-priority
■ [no] qos device-priority
417© 2009 Hewlett-Packard Development Company, L.P.
qosCommand Line Interface Reference Guide
To Next Page
Loading...
